HeritageCraft Architectural Conservation Services was founded in Loni, India, with a simple conviction — that historic buildings deserve to be repaired, not replaced. What began as a small documentation studio working on a single 19th-century wada has grown into a full-service conservation practice handling heritage structures across Maharashtra and neighbouring states.
Our multidisciplinary team combines conservation architects, structural engineers, archaeological chemists, heritage masons, stone carvers and timber specialists. Every project starts on site, not on a drawing board. We record cracks, salt deposits, moisture paths, previous repairs and material loss before a single intervention is proposed.
In Loni and the wider Ahmednagar belt, we work extensively with temple trusts, municipal heritage cells, educational institutions and private families who own ancestral properties. We understand the local building traditions — basalt and laterite masonry, lime-surkhi mortar, teak joinery and clay tile roofing — and we source compatible materials accordingly.
Our conservation philosophy follows internationally accepted principles of minimum intervention, reversibility and material compatibility. We never strip away historic patina. Instead, we stabilise, consolidate and gently repair so that the building continues to tell its own story for the next generation.
Beyond restoration, we provide condition mapping, archival documentation, heritage impact assessment and preventive maintenance planning. Whether it is a crumbling temple mandapa, a leaking colonial bungalow roof or a decaying stone facade on a busy street, our team delivers conservation work that is technically sound, legally compliant and visually respectful.
Nine specialised service lines covering assessment, treatment and long-term care of heritage structures in Loni and across India.
01
Full-scope restoration of historic temples, wadas, colonial bungalows and civic landmarks. Our team documents the existing fabric, identifies failing elements and rebuilds them using original techniques and regionally sourced materials.
Every restoration follows a minimum-intervention approach so that the building's historic character, patina and craftsmanship remain intact while structural safety is fully restored for daily use.
Learn More →
02
Load-bearing masonry walls, timber floors and stone columns in old buildings often fall short of modern safety expectations. We design discreet strengthening systems — grouting, stitching, tie rods and discreet steel or FRP reinforcement.
All interventions are engineered to remain visually recessive, so the strengthened structure continues to look and behave like the original historic building rather than a modern retrofit.
Learn More →
03
Years of soot, biological growth and cement-pointing can hide the beauty of natural stone. We use controlled micro-abrasion, poultice and steam cleaning methods to lift dirt without etching the historic surface beneath.
Where stone has decayed, we carry out lime-based consolidation, grouting and carefully matched indenting so repaired areas blend naturally with the surrounding masonry.
Learn More →
04
Cement plaster traps moisture and destroys historic masonry. We remove incompatible modern renders and reinstate breathable lime-surkhi plaster mixed to traditional proportions, matched for colour, texture and porosity.
Our craftsmen also restore decorative stucco mouldings, cornices, brackets and ornamental bands that define the architectural language of many Loni-era buildings.
Learn More →
05
Many heritage structures in Loni can be given a productive second life as boutique hotels, museums, cafés, offices or community halls. We plan new functions around the existing historic fabric rather than forcing the building to change.
Services include spatial feasibility, heritage-sensitive MEP routing, reversible partition design and conservation of original flooring, ceilings, doors and window joinery.
Learn More →
06
Before any repair begins, we create a complete record of the building — measured drawings, photographic surveys, material mapping and a graded condition report identifying every defect and its cause.
This documentation becomes a permanent conservation archive and is essential for statutory approvals, funding applications and future maintenance planning.
Learn More →
07
Original teak and shisham doors, windows, balconies, staircases and roof trusses are often the most characterful parts of a heritage building — and the most vulnerable to termites and moisture.
We treat, consolidate and splice decayed timber using matching species and traditional joinery, avoiding wholesale replacement wherever the original member can be saved.
Learn More →
08
Rising damp, roof leakage and salt crystallisation are the leading causes of decay in historic masonry. We trace the moisture path, correct the source and then treat the affected wall with breathable, sacrificial systems.
Our poultice desalination and lime-based damp-proofing methods reduce salt content gradually without sealing the wall and trapping further moisture inside.
Learn More →
09
Historic temples, churches and havelis in and around Loni hold painted murals, gold-leaf work, stencil borders and coloured lime finishes that require extremely careful hands.
Our conservators clean, consolidate and retouch these fragile surfaces using reversible conservation-grade materials, always documenting every step for future reference.
Learn More →Site photographs from our restoration projects across Loni and Maharashtra — before, during and after conservation.
Short films explaining heritage documentation, lime plastering, stone consolidation and structural strengthening techniques.
Trusts, architects, hoteliers and families who trusted HeritageCraft with their historic properties.
HeritageCraft handled the restoration of our 140-year-old temple mandapa with extraordinary care. Their lime plaster work matched the original so closely that even our elders could not tell where the repair began. Documentation was thorough and the site was always kept clean.
As a practising architect I am very particular about conservation ethics. This team respects minimum intervention and reversibility completely. Their condition mapping report on our colonial bungalow project was detailed enough to submit directly to the heritage committee.
We engaged them for mural conservation inside our museum wing. The patience and precision shown during cleaning and consolidation was remarkable. Every chemical and method used was documented, which is exactly what a museum requires for its records.
They converted our ancestral bungalow into a six-room heritage stay without damaging a single original element. The adaptive reuse planning, MEP routing and joinery restoration were all handled under one roof. Guests constantly compliment the old-world character.
Being based in Loni ourselves, it was a relief to find a conservation team that understood local basalt masonry and traditional mortar. They finished our sabha mandap strengthening before the festival season and stayed within the sanctioned budget.
We had a listed facade that had been badly patched with cement over the years. Their team removed the cement render, treated the salt damage and reinstated a breathable lime finish. Two monsoons later, there is not a single damp patch.
Common queries from owners, trusts and architects about architectural conservation in Loni and across India.
Architectural conservation is the process of protecting, stabilising and repairing historic buildings while preserving their original character. It includes condition assessment, documentation, material analysis, structural strengthening, and the use of compatible traditional materials such as lime mortar, stone and timber — rather than modern cement or concrete that can damage historic fabric.
Yes. Our base of operations is in Loni, India, and the majority of our projects are within Maharashtra. However, we regularly undertake documentation, condition mapping and conservation consultancy for heritage properties in other states as well. Travel and site mobilisation are planned transparently in the initial proposal.
A small facade or single-room conservation may take three to six weeks. A medium-sized wada or temple structure typically runs four to nine months. Large monuments with extensive structural work can take a year or more. We always begin with a documentation phase, which gives clients a realistic timeline before physical work starts.
Not always. While conservation is craft-intensive, it usually avoids the cost of new foundations, structural frames and statutory approvals for new construction. More importantly, conservation retains the heritage value, historical significance and often the tax or heritage benefits attached to the original structure — which a new build can never replace.
In most cases, no. We phase the work area by area so that daily activities can continue wherever it is safe. Only during structural strengthening or heavy scaffolding operations may a section need temporary closure. Access routes, dust control and safety barricading are planned in advance with the client.
Yes. We prepare measured drawings, photographic records, condition reports and material specifications that are accepted by heritage committees and municipal authorities. We also assist with heritage impact assessments and, where required, coordinate with structural engineers and licensed consultants for statutory submissions.
Share your heritage project details and our Loni-based team will respond with an initial consultation.
This is a demonstration website template and is not permitted to be downloaded or used. Please contact the Webmirchi Team for assistance and further details.
click this link now & enter your business type for complete information:
👉 webmirchi.com/offers/biz50 Contact for Live Demo / Zoom Meeting